Nov 11,2026
Permanent Magnet Synchronous Motors: Working Principle & Uses
Learn how permanent magnet synchronous motors work, compare surface and interior magnet designs, and understand PMSM control, applications, benefits, and limitations.
Permanent Magnet Synchronous Motors: How PMSMs Work
A practical introduction to permanent magnet synchronous motors, covering rotor and stator design, PMSM operation, drive control, applications, benefits, and limitations.
Introduction
A permanent magnet synchronous motor (PMSM) is an AC motor that uses permanent magnets in its rotor to create a magnetic field. The stator produces a rotating magnetic field, and the rotor follows it in synchronism. PMSMs are commonly used with electronic drives for applications that need controlled speed, accurate motion, or high torque from a compact motor. [1] [2]
PMSMs are used in industrial machinery, compressors, robotics, machine tools, and vehicle traction systems. Their construction differs from that of an induction motor, and that difference affects how the motor is controlled, cooled, and applied. [1] [3]
Key Takeaways
- The rotor magnetic field in a PMSM comes from permanent magnets rather than an electrically excited rotor winding. [2]
- The rotor runs in synchronism with the stator’s rotating field during normal operation, rather than relying on the slip characteristic of an induction motor. [2]
- Surface-mounted and interior permanent magnet motors are two common PMSM constructions, with different rotor magnetic properties. [2]
- PMSMs are usually controlled by a suitable electronic drive that coordinates stator current with rotor position and motor speed. [1] [4]
- Permanent magnets can generate voltage when the shaft rotates, even when the drive is stopped, so installation and maintenance must follow the motor and drive safety instructions. [4]
What is a permanent magnet synchronous motor?
A PMSM is a synchronous AC machine with a three-phase stator winding and a rotor containing permanent magnets. The stator winding creates a rotating magnetic field when supplied with appropriately controlled AC current. The rotor magnets interact with this field, producing torque and causing the rotor to turn in synchronism with the field. [2]
In an induction motor, the rotor current is induced by the stator field. In a PMSM, the permanent magnets provide the rotor’s magnetic excitation, so the rotor does not need the same induced-current mechanism to establish its magnetic field. This is one reason PMSMs can have high torque and power relative to their size, although actual performance depends on motor design and operating conditions. [1] [2]
How does a PMSM produce torque?
The drive supplies the stator with electrical currents that create a rotating magnetic field. The rotor’s permanent-magnet field aligns with and follows the stator field. By controlling the magnitude and timing of stator current relative to the rotor’s magnetic position, the drive controls motor torque and speed. [2] [4]
The word “synchronous” describes the rotor’s relationship to the rotating stator field. In steady operation, the rotor follows the field without the load-dependent slip characteristic found in an induction motor. The actual speed is set by the electrical frequency and the number of pole pairs, while torque depends on the interaction of the rotor magnets and stator current.
Common PMSM rotor designs
Surface-mounted permanent magnet motors
In a surface-mounted PMSM, magnets are attached to the outer surface of the rotor. The magnetic and mechanical characteristics of this arrangement differ from those of a rotor with buried magnets. The rotor design influences the motor’s inductance, field-weakening behavior, mechanical limits, and control requirements. [2]
Interior permanent magnet motors
In an interior PMSM (IPMSM), the magnets are embedded within the rotor. This creates different magnetic paths along the rotor’s direct and quadrature axes, a property known as saliency. The resulting characteristics can support additional torque production and affect the motor’s high-speed operating range and control. Exact performance depends on rotor geometry and motor design. [2]
Both surface-mounted PMSMs (SPMSMs) and interior PMSMs are used in practical motor-control systems. Their differences mean that control parameters and operating limits should be based on the specific motor, not assumed from the general PMSM label. [1] [2]
How are PMSMs controlled?
A PMSM generally requires a drive that can provide controlled AC current and coordinate it with the rotor’s magnetic position. Field-oriented control (FOC) is one commonly used method. It represents the motor currents in a rotor-related reference frame so the controller can manage torque-producing and flux-related current components separately. The choice of control method depends on the required accuracy, response, feedback arrangement, and motor design. [1] [3]
Some systems use an encoder or resolver to measure rotor position. Other systems estimate rotor position without a mechanical sensor, within the limits of their control method and operating conditions. Position information matters because energizing the stator with an incorrect relationship to the rotor field can reduce torque quality or cause unstable operation. [4]
PMSMs are not all interchangeable with a generic inverter setup. The drive must support the motor type and be configured with appropriate motor data and control settings. Startup procedures and wiring should follow the specific drive and motor documentation. [4]
Benefits and trade-offs
Because the rotor field comes from permanent magnets, a PMSM does not require rotor excitation current in the same way as an induction motor. PMSMs can therefore offer high efficiency, good torque response, and high power density in suitable designs. Their performance can be useful where the application needs a compact motor or controlled low-speed, high-torque operation. [1] [3]
Those characteristics do not make PMSMs the best option in every application. Permanent magnets add material and design considerations, while the drive and control system must be compatible with the motor. High-speed operation can require field weakening, and the achievable speed range depends on factors such as magnet arrangement, motor inductance, voltage limits, and drive capability. [2] [4]
Permanent magnets also create a safety consideration: if the motor shaft is turned, the motor can generate back electromotive force at its terminals. Depending on the system, this voltage may be present even when the inverter is stopped. Maintenance procedures must prevent unintended rotation and verify electrical isolation according to the manufacturer’s instructions. [4]
Where are PMSMs used?
PMSMs appear in applications where compact size, controlled motion, or efficient operation is important. Examples include air-conditioning and refrigeration compressors, direct-drive washing machines, power steering, machining tools, robotics, traction systems, and selected industrial low-speed, high-torque drives. [1] [3]
The motor must be matched to the task. Continuous torque, peak torque, speed range, acceleration, cooling, feedback needs, supply and drive characteristics, and the physical environment all influence whether a PMSM is suitable. The application’s requirements matter more than the motor category alone.
PMSM vs. induction motor
The central difference is how the rotor’s magnetic field is produced. A PMSM uses permanent magnets in the rotor; an induction motor develops rotor current through electromagnetic induction. PMSMs can offer high efficiency and power density in suitable applications, while induction motors are widely used because of their robust and well-established construction. [1] [2]
Both motor types can be operated with electronic drives, but their drive configuration and control are not necessarily interchangeable. A PMSM drive must account for rotor magnetic position and permanent-magnet back EMF. Motor and drive documentation should confirm compatibility and specify the required control method. [4]
Frequently asked questions
1 What does PMSM stand for?
PMSM stands for permanent magnet synchronous motor. It is a synchronous AC motor whose rotor magnetic field is produced by permanent magnets. [2]
2 Does a PMSM need a variable-frequency drive?
Most variable-speed PMSM applications use a compatible electronic drive to control stator current, speed, and torque. The required drive and control approach depend on the motor design and application. [1] [4]
3 What is the difference between a PMSM and an induction motor?
A PMSM uses permanent magnets to create its rotor field. An induction motor induces rotor current from the stator field and operates with slip. Their construction and drive-control requirements differ. [1] [2]
4 What is the difference between SPMSM and IPMSM?
In an SPMSM, magnets are mounted on the rotor surface. In an IPMSM, magnets are embedded inside the rotor. The different magnetic paths in an IPMSM create rotor saliency and influence its torque and field-weakening characteristics. [2]
5 Can a PMSM generate voltage when it is not powered?
Yes. If the shaft rotates, the permanent magnets can induce voltage at the motor terminals. This can occur even when the inverter is stopped, so maintenance must follow the system’s isolation and safety procedures. [4]
References
Related News
LATEST
INFORMATION
Get the latest product information of the company
NAVIGATION
PRODUCTS
CONTACT US
Telephone: +86 13305761511
Email: info@cntecho.com
Add: RM. 602, BUILDING B, NO.1551 SHUANGSHUI RD., LUQIAO DIST., TAIZHOU CITY, ZHEJIANG, CHINA
Copyright © 2026 TECHO ELECTRICAL & MECHANICAL (TAIZHOU) CO., LTD. All Rights Reserved.